SP58 Drill bit Masonry accessory 1 gallon) cartridge

1 gallon) cartridge

This tool is used to allow the head of the anchor to be completely flush with the asphalt surface

Below 50 °F EPX2 may not cure

It can be used with all BoltHold anchors

Note that the SP10 anchors are 6 inches long and require a 7/8" diameter hole

SP58 Drill bit Masonry accessory 1 gallon) cartridgeThis drill bit is suitable for installing the SP58 asphalt anchors. The bit can drill to a depth of 14" through asphalt, gravel and earth. Note you only need to drill 10" mark the bit with tape before drilling. The shank is SDS MAX. The bit has carbide tips for long life. Carbide is preferred over diamond tips as the hole they drill in asphalt is rougher, promoting improved adhesion between the asphalt and the adhesive grout. The hole still needs to