Separator Bar Tube Magnet - 25mm x 350mm | M6 Thread

Separator Bar Tube Magnet - 25mm x 350mm | M6 ThreadMagnetic Product Description: This Magnetic Separator Bar or Tube magnet has a 350mm length, a 25mm width and a 6mm thread on each end. It is made with a strong neodymium magnet encased in stainless steel. This separator magnetic tube is identified by the AMF magnets part number 93113. Uses for our separator bar tube magnets: Separation was a problem, a sweet sorrow, for Romeo and Juliet and ultimately for their interfering, feuding families. No such

a blunt timber rod remained

This telescopic wand is not a magic wand from the world of Harry Potter

very powerful and dangerous magnet and serious personal injury may occur if mishandled

This product uses the AMF magnet part number 22003A

This helps limit impurities and to maintain the quality of their product

Our white magnetic sheeting comes in a variety of thicknesses

the sweeper operator suspends the device over the metal recycling drum to deposit the catch with a squeeze of the release handle

Reed Switches containing hermetically sealed Alinco Rods are used by Meteorologists in Anemometers to measure wind speed with magnetic sensors that relay via electrical impulse the revolutions of the meter each time it passes the magnet  The frequency of the impulses is then translated to Knots or Kph

This Magnafix magnetic tape has a width of 25mm and a thickness of 1

Contact our office for custom built grate magnets

5 7 6 13 AMFYPA25 25 5

and a depth of 9mm