E46 (Non-M) Complete Polyurethane Differential Carrier Bushing Set Poly Hardness:95a

E46 (Non-M) Complete Polyurethane Differential Carrier Bushing Set Poly Hardness:95aE46 (NON M) COMPLETE POLYURETHANE DIFFERENTIAL CARRIER BUSHING SET 33176751808, 33176770788 Overview The E46 (non M), X3 and Early Z4 all have 3 diff bushings holding the differential. 2 smaller ones in the front, and one bigger rear bushing. Those BMW part numbers are 33176751808 (big rear carrier bushing) and 33176770788 for the small differential bushings. A bad or failed differential bushing should be replaced right away to avoid drivetrain

Subframe spacers come with every kit

Pedals/master cylinders are not included and must be bought

and Z3 subframes are all functionally the same fit there are minor differences in abs routing tabs

open the case and on the circuit board on the back of the speedo/odo there should be a sticker or etching directly on the circuit board stating VDO or Motometer

These just fit from under your strut mount and are installed between the top hat/camber plate and the strut tower

Adds considerable responsiveness

Look no further

These thick plates can be welded into place to prevent cracking or tears in the chassis where the rear trailing arms mount to the car

It is always best to use blue Loc-tite on all threaded connections

get straight to repairing your odometer

Dont forget the right power steering fluid: We recommend this one: https://amzn

Nothing that rotates should be aluminum